Termoregulatori

DIGITAL THERMOREGULATORS
DIGITERM thermo regulator family is characterized by digital concept not only in the display manner but also a complete signal processing. Common features for all thermoregulator are: Power supply: 230Vac or 24Vdc Consumption: 2VA (digiterm8T 4VA) Contact rating: 5A/250Vac Adjustment of all parameters is performed with the front panel keys. Parameters are read on the LED display with three digits All devices have a calibration potentiometer which can counteract the influence of the measuring cable lengths (the resistance probes); for multichannel device calibration is performed individually for each channel. All set parameters (temperature, time ...) stay in memory in case of power failure Almost all devices can be configured for heating or cooling mode. Type of control: on / off Measurement ranges and resolutions depend on the probes used.
	BASIC - DIGITERM 1T
Digiterm 1 M is a precision digital thermometer. Digiterm1T is thermo controller intended to measure and control temperature in a wide range. Operating temperature and hysteresis are entered with buttons on the front of the unit. Probes and temperature ranges for DIGITERM1M and 1T: - 20 / +100 C - 0.1C resolution, KTY81-accuracy + / -1.5% - 50 / +200 C-Pt100; Pt1000 - resolution 1C, accuracy + / -1% - 50 / +500 C-Pt100; Pt1000; 1C resolution, accuracy + / -1% - housing 96x48mm (93x45mm mounting hole) and 75x33mm (70x29mm mounting hole)
WITH TIMER FUNCTION - DIGITERM 1VT
	The combination of timer and thermoregulator. After reaching the set temperature timer begins to run. The temperature is maintained until the set time expires. Then the output relay is in off position, display shows instantaneous temperature and the message "END" to indicate the process is completed. Time can be set from 0-99.9 hours in steps of 0.1 hour. This regulator can be used in the chemical and food industries (metal powder coating, baking and drying processes ...) medicine (sterilizers) ... Temperature ranges and probes: -50 / +200 C-Pt100, Pt1000-resolution 1C -50 / +500 C-Pt100, Pt1000-resolution 1C -housing 96x48mm and 75x33mm
	THREE RELAY OUTPUT - DIGITERM 3R
Similar to Digiterm1T with the difference that it has three relay outputs that respond to different temperatures. Setting the temperature of reaction and hysteresis is performed for each relay output separatly. Impelemntation: - gradually turn off the heaters when we approach a given temperature - set separate thresholds for the temperature, signaling and alarm - on / off more refrigeration compressors depending on the temperature - the drying of wood Temperature ranges and types of probes are same as for Digiterm 1M and 1T.
	TWO CHANNEL REGULATOR - DIGITERM 2T
Digiterm 2T is a two channel thermal regulator. The characteristics are similar to Digiterm 1T (like two independent regulators in same housing). Hysteresis is fixed to 1 C (other values on request). Housing96x48mm. Temperature ranges: - 30/+100C (KTY81) - 50 / +200 C and -50 / +500 C (Pt1000).
	EIGHT CHANNEL METER/REGULATOR - DIGITERM 8M, 8T
Digiterm8M- eight channel thermometer. It has eight inputs for sensors and allows display of temperature measured one after another, in automatic mode, or display the temperature of the selected channel in manual mode. Channel and manual/ automatic mode selection is via front panel buttons. Display shows number of channel (one digit) and current temperature (three digits). Temperature ranges: -50 / +200 C and -50 / +500 C Probe: Pt 100 Case: 96x96mm Digiterm8T - eight channel thermo regulator. The characteristics are similar to Digiterm8M with the additional possibility that, for each channel independently, you can configure mode (heating / cooling), the upper temperature limit and hysteresis. Temperature ranges: -50 / +200 C and -50 / +500 C Probe: Pt 100 Case: 96x96mm
	DIFFERENTIAL THERMO CONTROLLER - DIFTERM
Differential thermo controller is used for solar water heating systems. It has two probes that operate in the range 0..100C. The display can show the temperature of the boiler and collectors (selected by the user). When the collector temperature rises above the value of boiler temperature for a set value, relay output allows the pump to run. When the temperature difference between boiler and collector drops to a specific value pump is turned off. User specifies the temperature difference depending on whether it is a direct system or system with heat exchanger.
	ACQUISITION SYSTEM
It is designed to display, capture, store and print data on measured temperatures in refrigerators, dryers in food, chemical, pharmaceutical and other similar industries. Standard implementation: twelve sampling locations from which data are collected with the current value displayed on the display. Temperature can be within -50 ... +100 C. The resolution is 0.1 C, and the display accuracy + / -0.5 C. Every hour the measured values are recorded in memory together with time stamp (date and hour) . The memory is sufficient for approximately forty days. Memorised information can be displayed or printed in the form of tabular reports. Reports, and the whole system, can be useful in monitoring the temperature in order to meet a specific production process, energy savings, generate reports to meet ISO standards... On request we can make data acquisition systems with different characteristics (number of sampling locations, acquisition frequency, amount of memory ...)
TEMPERATURE PROBES

AIR HUMIDITY METER/REGULATOR
	DIGITAL HUMIDITY REGULATOR - RV
Digital humidity controllers are programmable microprocessor devices that are used for measurement and control of relative humidity in air conditioning systems, drying, chambers for storing fruits and vegetables, mushroom farms, wood , pasta, and herbs drying. Humidity controllers feature fully digital concept in complete signal processing. The main characteristics of these devices are: -power supply: 230Vac or 24Vdc -consumption: about 2VA -contact ratings: 5A/250Vac -display: LED display with two digits -parameter setting: keys on front panel -measuring range: 5-95% RH -resolution: 1% RH -linearity: + / -1% -operating temperature range :0-50C RV is a programmable digital device for measuring and controlling humidity with two relay outputs. Specifies the following parameters: the lower limit (DG), the lower limit of hysteresis (HDG), the upper limit (GG) and the upper limit of hysteresis (HGG). It can be used to maintain moisture within set limits (relay outputs will include the necessary wetting or drying of air) or only to detect that relative humidity reached a certain percentage (used in one of the relay outputs K1 or K2 depending on whether it is necessary to dry or humidifying).
In prepare: a combined device for measuring and regulating humidity and temperature. High level of measuring probe protection will allow use in polluted environments
DIMENSIONAL DRAWING

In order to rationalize production and continuous improvement of product quality changes are possible in the appearance and characteristics of actual devices compared to this catalog.
ABOUT US PRODUCTS

DIGITAL THERMOREGULATORS

DIGITERM thermo regulator family is characterized by digital concept not only in the display manner but also a complete signal processing. Common features for all thermoregulator are:
Power supply: 230Vac or 24Vdc
Consumption: 2VA (digiterm8T 4VA)
Contact rating: 5A/250Vac
Adjustment of all parameters is performed with the front panel keys. Parameters are read on the LED display with three digits
All devices have a calibration potentiometer which can counteract the influence of the measuring cable lengths (the resistance probes); for multichannel device calibration is performed individually for each channel.
All set parameters (temperature, time ...) stay in memory in case of power failure
Almost all devices can be configured for heating or cooling mode.
Type of control: on / off
Measurement ranges and resolutions depend on the probes used.

BASIC - DIGITERM 1T

Digiterm 1 M is a precision digital thermometer.

Digiterm1T is thermo controller intended to measure and control temperature in a wide range. Operating temperature and hysteresis are entered with buttons on the front of the unit.
Probes and temperature ranges for DIGITERM1M and 1T:
- 20 / +100 C - 0.1C resolution, KTY81-accuracy + / -1.5%
- 50 / +200 C-Pt100; Pt1000 - resolution 1C, accuracy + / -1%
- 50 / +500 C-Pt100; Pt1000; 1C resolution, accuracy + / -1%

- housing 96x48mm (93x45mm mounting hole) and 75x33mm (70x29mm mounting hole)

WITH TIMER FUNCTION - DIGITERM 1VT

The combination of timer and thermoregulator. After reaching the set temperature timer begins to run. The temperature is maintained until the set time expires. Then the output relay is in off position, display shows instantaneous temperature and the message "END" to indicate the process is completed. Time can be set from 0-99.9 hours in steps of 0.1 hour. This regulator can be used in the chemical and food industries (metal powder coating, baking and drying processes ...) medicine (sterilizers) ...
Temperature ranges and probes:
-50 / +200 C-Pt100, Pt1000-resolution 1C
-50 / +500 C-Pt100, Pt1000-resolution 1C

-housing 96x48mm and 75x33mm

THREE RELAY OUTPUT - DIGITERM 3R

Similar to Digiterm1T with the difference that it has three relay outputs that respond to different temperatures. Setting the temperature of reaction and hysteresis is performed for each relay output separatly.
Impelemntation:
- gradually turn off the heaters when we approach a given temperature
- set separate thresholds for the temperature, signaling and alarm
- on / off more refrigeration compressors depending on the temperature
- the drying of wood

Temperature ranges and types of probes are same as for Digiterm 1M and 1T.

TWO CHANNEL REGULATOR - DIGITERM 2T

Digiterm 2T is a two channel thermal regulator. The characteristics are similar to Digiterm 1T (like two independent regulators in same housing). Hysteresis is fixed to 1 C (other values on request). Housing96x48mm.

Temperature ranges:

- 30/+100C (KTY81)
- 50 / +200 C and -50 / +500 C (Pt1000).

EIGHT CHANNEL METER/REGULATOR - DIGITERM 8M, 8T

Digiterm8M- eight channel thermometer. It has eight inputs for sensors and allows display of temperature measured one after another, in automatic mode, or display the temperature of the selected channel in manual mode. Channel and manual/ automatic mode selection is via front panel buttons. Display shows number of channel (one digit) and current temperature (three digits).
Temperature ranges: -50 / +200 C and -50 / +500 C
Probe: Pt 100
Case: 96x96mm

Digiterm8T - eight channel thermo regulator. The characteristics are similar to Digiterm8M with the additional possibility that, for each channel independently, you can configure mode (heating / cooling), the upper temperature limit and hysteresis.
Temperature ranges: -50 / +200 C and -50 / +500 C
Probe: Pt 100
Case: 96x96mm

DIFFERENTIAL THERMO CONTROLLER - DIFTERM

Differential thermo controller is used for solar water heating systems. It has two probes that operate in the range 0..100C. The display can show the temperature of the boiler and collectors (selected by the user). When the collector temperature rises above the value of boiler temperature for a set value, relay output allows the pump to run. When the temperature difference between boiler and collector drops to a specific value pump is turned off. User specifies the temperature difference depending on whether it is a direct system or system with heat exchanger.

ACQUISITION SYSTEM

It is designed to display, capture, store and print data on measured temperatures in refrigerators, dryers in food, chemical, pharmaceutical and other similar industries. Standard implementation: twelve sampling locations from which data are collected with the current value displayed on the display.
Temperature can be within -50 ... +100 C. The resolution is 0.1 C, and the display accuracy + / -0.5 C. Every hour the measured values are recorded in memory together with time stamp (date and hour) . The memory is sufficient for approximately forty days. Memorised information can be displayed or printed in the form of tabular reports. Reports, and the whole system, can be useful in monitoring the temperature in order to meet a specific production process, energy savings, generate reports to meet ISO standards... On request we can make data acquisition systems with different characteristics (number of sampling locations, acquisition frequency, amount of memory ...)

TEMPERATURE PROBES

AIR HUMIDITY METER/REGULATOR

DIGITAL HUMIDITY REGULATOR - RV

Digital humidity controllers are programmable microprocessor devices that are used for measurement and control of relative humidity in air conditioning systems, drying, chambers for storing fruits and vegetables, mushroom farms, wood , pasta, and herbs drying.
Humidity controllers feature fully digital concept in complete signal processing.
The main characteristics of these devices are:
-power supply: 230Vac or 24Vdc
-consumption: about 2VA
-contact ratings: 5A/250Vac
-display: LED display with two digits
-parameter setting: keys on front panel
-measuring range: 5-95% RH
-resolution: 1% RH
-linearity: + / -1%
-operating temperature range :0-50C

RV is a programmable digital device for measuring and controlling humidity with two relay outputs. Specifies the following parameters: the lower limit (DG), the lower limit of hysteresis (HDG), the upper limit (GG) and the upper limit of hysteresis (HGG). It can be used to maintain moisture within set limits (relay outputs will include the necessary wetting or drying of air) or only to detect that relative humidity reached a certain percentage (used in one of the relay outputs K1 or K2 depending on whether it is necessary to dry or humidifying).

In prepare: a combined device for measuring and regulating humidity and temperature. High level of measuring probe protection will allow use in polluted environments

DIMENSIONAL DRAWING

In order to rationalize production and continuous improvement of product quality changes are possible in the appearance and characteristics of actual devices compared to this catalog.

ABOUT US PRODUCTS